Bundle & Save
Product Information
Shipping
Free delivery to Victoria, most of New South Wales, and most of South Australia. For all other states please call 1300 326 453 for a discounted freight quote.
Please see attached map for details of freight free zones
If you have any questions or just to have a yarn, we will be happy to hear from you.. call us on 1300 326 453
Specifications
- Fully tested polyethylene tank designed to withstand ground and water pressure at depth.
- Engineered by geotechnical experts including Finite Element Analysis (FEA). These calculations are provided with the tanks.
- Sealed locking tamper proof lid.
- Anti-flotation design and engineering specifications completed to AS1170.
- Certified to AS/NZS 4766 Rainwater tank standard
- The underground tank houses an 80LPM submersible pump delivering high volume and pressure suitable for most homes, including single-storey and multi-storey dwellings.
Includes a ‘Rains to Mains’ switch.
Dimensions : 3520L x 1640W x 1665H
Vortex Filter
- Self cleaning – captures more than 90% of water while cleaning your filter as well
- Withstands up to 30 tonnes of vehicle weight
- Extension risers available for deeper underground installation
- Vortex Filter for roof area up to 200 square metres with 100mm pipe entry
FAQs
What needs to be considered when buying a tank?
Some of the considerations are listed here:
- How much rainfall your area typically receives.
- The surface area of your roof/collection area (This determines how much rainfall you are able to harvest).
- What applications you intend on using the water for.
- How long the rain water will need to be stored.
- The size of the space you have.
- Where the tank is going to be located.
Can I use my tank water Storage with my firefighter?
Yes, any large amount of water storage can be used as the inlet to a firefighting pump or sprinkler system.
The pump type, e.g. flow and pressure will need to determined as well the correct type of firefighting hose and connections. We are able to assist with all of that.
What property access is required for delivery?
Our tanks can be quite large making the trucks loads very high and long and we take the job of delivering your tank safety very seriously. Therefore, we have established clear guidelines for our deliveries.
- The clearance required for truck and trailer is 19 metres long, 5 metres high and 3.5m wide.
- Ensure there are no low-lying branches or powerlines
- Make sure the gate/entrance is wide enough and there is enough turning area for the 19m long truck and trailer (size of a normal roundabout)
What areas in Victoria are affected by National Heavy Vehicle Regulator and require Oversize Permits?
- Otway and Mountainous Areas (highlighted in Pink)
- Melbourne and Geelong urban areas (highlighter in Green)
Due to these restrictions, Polymaster will be required to transport some of our larger tanks with the aid of escorts or pilots. The regions in pink on the Vic Roads map below indicate where these limitations are in effect, while red lines on the map indicate additional specific roads where restrictions apply.
Do I need a pump?
It is recommended if you would like your tank water to have the same pressure as mains water. If you have a pump, it is also recommended that you protect your pump from the elements with a pump cover to extend its working life. A pump cover also reduces noise and can reduce problems with your water system through improved reliability.
What accessories will I need?
Most tanks should come ready to hold water, which means they include a strainer, a vented lid, an overflow and an outlet and ball valve. Depending on the intended application you may need additional pumps, piping, fittings, first flush diverters and/or filters. You can also consider additional outlets with valves and taps, water tank level gauge, signage, venting, additional manholes and a number of other options. We can assist with all of that.